Robinhood Chain is an Arbitrum-based Ethereum Layer 2 launched by Robinhood, live on mainnet since 1 July 2026 (Chain ID 4663, gas paid in ETH, blocks visible on Robinscan). Its main token launchpads are Pons, flap.sh, bankr, Openfair, RobinPad, hood.fun, pmav and ArrowPad, with Noxa currently paused. They differ in launch model — fixed-supply, fair-launch bonding curve, agent-driven or one-tap no-code — but every token ends up as a standard ERC-20 with a live Pleiades or Uniswap pool. Once that pool exists, Robinhood Volume Bot can route genuine, on-chain volume into it, non-custodial, at a flat 0.5% fee.
Robinhood Chain launchpads are the tools that turn an idea into a tradable token on Robinhood’s own Layer 2. Each one handles the mechanics of creating an ERC-20, seeding liquidity and opening trading, but they take different routes to get there. This guide walks through every major pad on the chain, explains the launch model behind each, and shows where they converge: the moment your token has a live Pleiades or Uniswap pool, the launch stops being about deployment and starts being about visible activity. That is the part this guide connects end to end.
The through-line matters because a launchpad’s job ends the second your pool goes live. It does not trade for you, and it cannot make a quiet chart look alive. Aggregators such as DEX Screener and DexTools rank tokens on 24-hour volume, unique makers, transaction count and buy pressure — none of which a launchpad supplies after graduation. Whichever pad you pick, the same engine can route real swaps into the resulting pool so the token reads as active to the trackers your community is watching.
What is Robinhood Chain?
Robinhood Chain is an Ethereum Layer 2 built on the Arbitrum stack and launched by Robinhood — not Coinbase, a point worth stating plainly because the two are often confused. Mainnet went live on 1 July 2026. The network uses Chain ID 4663 (hex 0x1237), pays gas in ETH, and exposes every transaction through its explorer, Robinscan (robinscan.io). Trading happens in DEX pools; launchpad tokens graduate into live Pleiades or Uniswap pools once their launch phase completes.
For anyone launching a token, three things follow from that design. First, because it is an EVM chain, standard wallets and standard ERC-20 tooling work without modification. Second, because settlement is public on Robinscan, any activity around your token is verifiable — there is nowhere to hide a fake number. Third, because liquidity lives in Pleiades and Uniswap pools rather than inside the launchpad, your token’s visibility after graduation depends entirely on what trades through that pool. Those three facts shape everything below.
The launchpad landscape at a glance
Robinhood Chain already hosts a spread of launchpads, and they are not interchangeable. Some are built for fixed-supply launches with deep pools; others are fair-launch bonding curves designed to migrate liquidity as they fill; a few are no-code or agent-driven tools aimed at speed. The table below summarizes each pad by launch model, where liquidity lands, and current status. Read it as a map, not a ranking — there is no single “best Robinhood Chain launchpad,” only the right one for a given launch.
| Launchpad | Launch model | Liquidity destination | Status |
|---|---|---|---|
| Pons | Fixed-supply launches | Uniswap | Live |
| flap.sh | Fair-launch bonding curve | Pleiades or Uniswap | Live |
| bankr | Agent / command-driven deploys | Pleiades or Uniswap | Live |
| Openfair | No-code, automated liquidity | Bonding curve or instant Uniswap | Live |
| RobinPad | Native RH Chain pad | Pleiades or Uniswap | Live |
| hood.fun | One-tap no-code | Automated liquidity | Live |
| pmav | Community launchpad | Pleiades or Uniswap | Live |
| ArrowPad | Fair bonding curve | Migrates to Uniswap | Live |
| Noxa | Memecoin pad | Existing Pleiades / Uniswap pools | Paused |
Pons
Pons is the flagship launchpad on Robinhood Chain, built for fixed-supply token launches that graduate into deep Uniswap pools. It sits at the center of the chain’s memecoin activity, which makes it the default starting point for creators who want their launch surrounded by the most-watched pools on the network. The fixed-supply model means the token’s cap is set at creation rather than emitted over time, so holders know the denominator from the start and the migration to Uniswap gives them a familiar, liquid venue to trade against.
What to know: because Pons launches land in some of the most closely watched pools on the chain, they also face the most competition for attention. Deep liquidity is an advantage for traders, but it also means a small amount of organic trading barely moves the needle on the trending boards. That is the volume angle for Pons — a paced, verifiable volume run is what helps a launch stand out where eyes already are. The Pons volume bot guide covers routing swaps into a graduated Pons pool step by step.
flap.sh
flap.sh is a permissionless fair-launch pad on Robinhood Chain built around a bonding curve. Instead of setting a price and seeding a pool up front, a fair-launch curve lets buyers push the price along a predefined curve; once the curve fills, the token migrates to a Pleiades or Uniswap pool — which is exactly where generated volume needs to land. The fair-launch model appeals to communities that want no privileged early allocation and a transparent, on-chain price discovery mechanism.
What to know: curve-stage tokens have thin order books, so the earliest hours are fragile. A launch can stall on the curve if activity dries up before migration. Early, well-paced volume is what pushes a flap.sh launch onto the trending radar and helps carry the curve toward graduation. Once the pool is live, routing real buys and sells through it keeps the momentum visible. See the flap.sh volume bot guide for the specifics of trading a graduated flap.sh token.
bankr
bankr brings agent and command-driven token deploys to Robinhood Chain, letting creators launch and manage a token from a single interface. Rather than clicking through a multi-step form, a creator issues commands and an agent handles deployment, configuration and management. It is a model built for speed and for people comfortable driving a launch through instructions rather than menus.
What to know: automating the deploy does nothing for what happens after it. Agent-launched tokens still need genuine on-chain depth to look alive, and the interface that made deployment effortless does not trade the token for you. That is where routed volume fits — the bot supplies verifiable activity around a bankr deploy once its pool is live. The bankr volume bot guide details the workflow.
Openfair
Openfair offers no-code token creation with automated liquidity and permissionless trading on Robinhood Chain’s EVM Layer 2. It supports either a bonding-curve launch or an instant Uniswap listing, so a creator can choose price-discovery-by-curve or open trading immediately. The no-code path lowers the barrier for creators who do not want to touch contracts, while automated liquidity removes the manual step of seeding a pool.
What to know: when liquidity is seeded automatically, the one thing Openfair cannot manufacture is trading activity. A pool with liquidity but no trades still reads as dormant to aggregators. That missing piece — genuine, paced swaps — is precisely what a volume run adds. The Openfair volume bot guide shows how to route it into either launch type.
RobinPad
RobinPad is a Robinhood Chain-native launchpad for spinning up tokens and pools directly on the chain. As a native pad it is designed to fit cleanly into the chain’s pool infrastructure, so tokens launched here settle into standard Pleiades or Uniswap pools with no unusual routing. For creators who want a straightforward, chain-native path from idea to tradable token, it is a low-friction option.
What to know: a RobinPad pool responds cleanly to routed swaps, which means volume settles exactly where DEX Screener and DexTools read it. There is nothing exotic to work around — the pool behaves like any other Uniswap-style pool on the chain. The RobinPad volume bot guide walks through a campaign on a RobinPad token.
hood.fun
hood.fun provides one-tap, no-code token creation with automated liquidity for Robinhood Chain creators. It is the fastest lane on the chain: a single tap creates the token and seeds its liquidity, with no configuration required. That speed is the whole point — it is built for creators who want to be trading in seconds, not walking through a checklist.
What to know: low-effort launches flood the feed. When creating a token takes one tap, a lot of tokens get created, and most of them look identical from the outside. Genuine, verifiable volume is how a hood.fun token separates itself from that noise — it is the signal that turns one of many launches into one worth a second look. The hood.fun volume bot guide covers the routing.
pmav
pmav is a newer launchpad building on Robinhood Chain with a community-driven launch flow. Where some pads optimize for solo creators and speed, pmav leans into the community angle — the launch is shaped around the group rallying behind the token rather than a single deployer. That makes timing especially important: the launch window is when the community is paying attention.
What to know: early community tokens live or die on visible activity. If the chart is flat during the exact window when the community is watching, the launch loses its own audience. Timing real volume to that launch window matters most here — it keeps the token active precisely when attention peaks. The pmav volume bot guide explains how to line up a run with the launch.
ArrowPad
ArrowPad lets creators launch a token in seconds on a fair bonding curve and trade it instantly on Robinhood Chain, with liquidity migrating to Uniswap as the curve fills. It combines the fair-launch, no-privileged-allocation model with a fast, trade-immediately experience: the token is live and tradable from the moment it launches, and the curve carries it toward a Uniswap pool as buyers arrive.
What to know: bonding-curve tokens need early activity to fill the curve and migrate. A launch that stalls mid-curve never reaches the deeper Uniswap liquidity, and the momentum fizzles. Timed volume is what carries an ArrowPad launch across that migration line — and once the token is on Uniswap, the same routed swaps keep it visible. The ArrowPad volume bot guide has the details.
Noxa (paused)
Noxa was the launchpad that drove Robinhood Chain’s first memecoin wave before it halted new launches. It is currently paused and under maintenance, so it is not the place to start a new token today. Crucially, though, its history still lives on-chain: existing Noxa tokens continue to trade on their Pleiades and Uniswap pools, unaffected by the pad’s pause.
What to know: the pause applies to new launches, not to trading. If you already have a Noxa-launched token with a live pool, that pool works exactly like any other on the chain — the bot can route volume into a live Noxa pool even while the pad itself is offline. If you are choosing where to launch now, pick one of the live pads above instead.
Which launchpad for which goal?
The right pad depends on what you value: a fixed cap and deep liquidity, a transparent fair launch, raw speed, or a community-shaped rollout. Use this as a starting frame, then match it to how you actually plan to run the launch. Every option below produces a standard ERC-20 with a live pool, so the volume workflow afterward is identical regardless of which you choose.
| Your goal | Pads that fit | Why |
|---|---|---|
| Fixed supply, deep pool, maximum visibility | Pons | Flagship pad; fixed-supply launches graduate into deep Uniswap pools |
| Transparent fair launch, no early allocation | flap.sh, ArrowPad | Bonding-curve price discovery that migrates on fill |
| Launch and trade in seconds | hood.fun, ArrowPad | One-tap or seconds-to-trade with automated liquidity |
| No-code with automated liquidity | Openfair, hood.fun | No contracts to touch; liquidity seeded for you |
| Drive the launch by command / agent | bankr | Agent and command-driven deploy and management |
| Community-shaped rollout | pmav | Launch flow built around a community window |
| Chain-native, straightforward path | RobinPad | Native pad that settles cleanly into standard pools |
How to launch a token on Robinhood Chain
The steps below are the common shape of a launch across every live pad. The exact clicks differ, but the sequence — and the moment the volume workflow begins — is the same.
- Pick a pad from the live options above based on your launch model: fixed-supply, fair-launch curve, no-code speed, agent-driven or community.
- Connect an EVM wallet (MetaMask, Coinbase Wallet or WalletConnect) and add Robinhood Chain — Chain ID 4663, gas in ETH, explorer Robinscan.
- Create the token on the pad: set the name, symbol, supply model and any launch parameters the pad exposes.
- Complete the launch phase. On a bonding-curve pad, that means filling the curve so liquidity migrates; on an instant-listing pad, the pool opens right away.
- Confirm the live pool. Once the token has a Pleiades or Uniswap pool, copy the contract address — that address is the only thing the volume workflow needs.
- Route volume and support it organically. Open the console, paste the contract, set your makers, ETH volume and duration, and pair the run with real marketing to bring in organic buyers.
The volume angle: what happens after graduation
Here is the part every launchpad leaves to you. The moment your token has a live Pleiades or Uniswap pool, its visibility is decided by what trades through that pool — and the pad has already done its job. Robinhood Volume Bot routes real, on-chain buys and sells into that pool from many unique maker wallets, with randomized sizing and timing, so the token reads as active on the same trackers your community checks.
Three things make this different from a cosmetic counter. It is non-custodial — the swaps are self-funded trades you sign from your own wallet, and no one takes custody of your funds. It is verifiable — every swap is a genuine Robinhood Chain transaction you can inspect on Robinscan, and it flows through to DEX Screener and DexTools because they read the chain directly. And the pricing is a flat 0.5% fee in ETH on the volume you generate, with a minimum of 50 ETH, up to 10,000 makers and durations from 1 to 72 hours. The table below contrasts real routed volume with a fake counter.
| Signal | Real on-chain volume | Fake counter |
|---|---|---|
| Visible on Robinscan | Yes | No |
| Counts on DEX Screener / DexTools | Yes | No |
| Real maker wallets & transactions | Yes | No |
| Survives a community audit | Yes | No |
| You keep custody of funds | Always | Often not |
No tool, launchpad or bot can promise a price or a profit, and this one does not. Generated volume controls the timing and scale of visible activity; it is your community, your product and your marketing that turn that visibility into lasting organic demand. Used honestly, alongside real promotion, a paced volume run is simply the difference between a token that looks as alive as it is and one that gets scrolled past. When your pool is live, open the console and set up a run in under a minute.
FAQ
What are the main launchpads on Robinhood Chain?
The live pads are Pons, flap.sh, bankr, Openfair, RobinPad, hood.fun, pmav and ArrowPad. Noxa exists but is currently paused for new launches, though its existing tokens still trade. Each pad differs in launch model, but all produce a standard ERC-20 with a Pleiades or Uniswap pool.
What is the best Robinhood Chain launchpad?
There is no single best pad — it depends on your launch. Pons suits fixed-supply launches that want deep pools and maximum visibility; flap.sh and ArrowPad suit transparent fair launches; hood.fun and Openfair suit fast no-code launches; bankr suits command-driven deploys; pmav suits community rollouts; RobinPad is a straightforward chain-native path. Be wary of anyone ranking pads with invented metrics.
What is Pons launchpad?
Pons is the flagship launchpad on Robinhood Chain, built for fixed-supply token launches that graduate into deep Uniswap pools. It sits at the center of the chain’s memecoin activity, which is why paced, verifiable volume matters for standing out on a Pons launch.
How do I launch a token on Robinhood Chain?
Pick a live pad, connect an EVM wallet configured for Robinhood Chain (Chain ID 4663, gas in ETH), create the token with your chosen supply model, and complete the launch phase so liquidity lands in a Pleiades or Uniswap pool. Once that pool is live, you can route volume into it and support it with organic marketing.
Can I generate volume no matter which launchpad I used?
Yes. The volume workflow does not care which pad launched the token — it only needs a live Pleiades or Uniswap pool. Once your token has graduated from the curve or been listed, paste its contract into the console and the engine routes genuine swaps through that pool, non-custodial, at a flat 0.5% fee.
Does the volume bot work while a token is still on a bonding curve?
Volume routes through a live DEX pool, so it works best once your token has migrated from the curve to its Pleiades or Uniswap pool. Before migration, liquidity is on the curve and there is no external pool to trade against.
Whichever pad you launched on, once your pool is live the next move is the same. Open the console and route real, verifiable volume in under a minute.
